Cutting laminating pouches

Laminators Viewed: 142

Can laminating pouches be cut to size before lamination?

In principle, they can. However, we recommend laminating the document first and cutting it to size afterwards. This makes processing significantly easier and ensures that the laminated item is completely enclosed in the laminating pouch. Unsightly overlaps and air bubbles are also far less common if the laminated item is cut to size after lamination.

Can I also cut the laminating pouch after lamination?

We recommend always cutting the laminating pouch after lamination. This can be helpful to remove excess material or cut the laminated document down to a particular size. Always leave a small border to ensure that the seal is not damaged.

What tools are best for cutting laminating pouches?

You can use scissors or guillotines to cut laminating pouches. If you want to cut delicate shapes, curves or corners, use a sharp pair of scissors from our comprehensive scissor range. For long, straight cuts you should ideally use a guillotine.

Are there specific techniques to cut laminating pouches with precision?

If you want to make precise cuts, it can be useful to mark them out on the pouch. You can use a non-permanent marker to lightly draw lines designating the area you want to cut. For long, straight cuts you should ideally use a Dahle guillotine; the extensive format lines printed onto the table of our guillotines make aligning and cutting items to a specific size especially easy.

Can cutting the pouch affect the lamination result?

Cutting carelessly or too close to the document may affect the seal and open the laminated document, which can cause the lamination to separate at the edges and allow moisture or dirt to penetrate.