DAHLE 203

Professional document shredder with manual paper feeder and P2 strip cut

Convenient deskside document shredder
Doors open wide for easy emptying of waste container
Intuitive, user-friendly illuminated control panel with audio signals
Device shuts down automatically after 30 minutes without use
Electronic start and stop function controlled by integrated light barrier
Convenient feeding and reversing function for manual control
Automatic safety shut-off when the waste container is full or the door is open
Optical waste level indicator
High-quality solid steel cutting rollers made of special steel for guaranteed long lifetime
Pull-out waste container
Powerful motor ensures high performance and longer run times
Extremely quiet operation
Convenient swivel castors, two of which are lockable, with 5 cm ground clearance for greater mobility
Easy-to-reach main switch on rear of device
Practical cold-device plug can be detached from document shredder

0,00 €

SKU: 40104-04249 Categories: Document shredders, Heavy duty shredders, Shredders

Deskside document shredders:performance and convenience directly at the desk

Device shuts down automatically after 30 minutes without use

Extremely quiet for a pleasant, low-noise working environment

35-year guarantee on the cutters

German Engineering by Dahle

Detachable IEC power plug makes the document shredder quick and easy to move from A to B

Separate main switch is located on the rear of the document shredder and completely disconnects it from the mains power supply

Robust wooden cabinet with doors that open wide to allow easy emptying of document shredder

P-2 security: recommended, for example, for data media containing internal data that are to be made illegible

Entry width in mm	220
Sheet capacity (80g/sqm)*	13 sheets
Particle size (in mm)	3,9 mm
Run time	10min
Cards	yes
Paper clips	yes
Waste collection volume (in l)	30 l
Noise level when idle (db(A))	49 dB(A)
Power consumption	350 W
Speed (m/min)	6
Cut type	Strip cut
Paper feeder	manual
Security level	P-2
Material to be cut	Cards Paper

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.

Frequently Asked Questions

Can I use any oil for my document shredder?

Our document shredder oils are specially designed for regularly shredder oiling making them perfect for maintenance of your device. Our document shredder oils are biodegradable meaning any leftovers from the oiling process can be easily disposed...

Read More

How do I oil my document shredder correctly?

Some of our Dahle Cross Cut document shredders need to be regularly oiled to ensure their smooth function. Bottled Dahle document shredder oil or oil paper is perfect for this. Simply use bottled oil between two sheets of paper to ensure nothing...

Read More

What document shredder oil should I use – oil paper or bottled oil?

Both are suitable for maintenance of your document shredder. The only difference lies in the handling: oil paper is pre-prepared and ready to use. All you have to do is unpack it and feed it directly into the document shredder. For document...

Read More

What are the security levels?

ISO/IEC 66399 (DIN 21964) defines seven security levels for destroying data using document shredders. The security levels are named by abbreviating the respective type of data carrier and adding ascending numbers from 1 to 7, for example P-4. The...

Read More

What may be shredded?

Any DAHLE document shredder can easily destroy data in paper form, but some devices will also shred CDs, DVDs and cards. Many DAHLE document shredders have separate collection bins for paper, CDs, DVDs and cards, allowing you to separate and...

Read More

Which document shredder suits me?

Do you have piles of old documents, but you just can't find the right document shredder? Do you not know what to look for with all the technical details? With our interactive document shredders advisor you can find the right product in just a few...

Read More

How large should the shredder be (collection volume)?

The right waste collection volume for your document shredder depends on two factors. First, establish how many people will be using the document shredder. The more people use the device, the bigger the waste collection volume should be. As a rule...

Read More

What is the operating time of my shredder?

Every document shredder has an individual run time. Depending on the device’s cutting capacity, a document shredder can operate for a certain amount of time before it needs to be paused for a while. So run time refers to the amount of time for...

Read More

Do document shredders need to be serviced?

Ensuring that your document shredder has a long, trouble-free service life requires occasional maintenance. In addition to emptying the waste container, for some devices this includes oiling the cutting rollers. Oiling maintains your shredder’s...

Read More

What is strip cut?

Document shredders with strip cut shred a sheet of paper into multiple strips. The width of these strips depends on the security level. Strip cut does not always reliably prevent reproduction of the destroyed data, so this type of document...

Read More

What is crosscut?

Cross cut (also known as particle cut) means a sheet of paper is chopped into small particles. The sheet is cut both vertically and horizontally, so that only small particles are left over. The size of these particles depends on the security...

Read More

What is Particle cut?

Particle cut (also known as cross cut) means a sheet of paper is shredded into small particles. The sheet is sliced both vertically and horizontally, so small particles are all that remain after shredding. The size of these particles depends on...

Read More

What types of cuts are there in document shredders?

DAHLE document shredders come in three different cut types: strip cut, cross or particle cut, and micro cut. Cut types describe the kind of particles that are created when shredding a sheet of paper. Strip cut means the sheet is sliced into...

Read More

Product datasheet

Brochure

User-Information

Compare with similar products

compare this product with similar products from this category

Current Product: DAHLE 203

Sku40104-04249

ExcerptProfessional document shredder with manual paper feeder and P2 strip cut

DimensionsSelect a variation

BrandDahle

Cardsyes

Cut typeStrip cut

Entry width in mm220

Material to be cutCards, Paper

Noise level when idle (db(A))49 dB(A)

Paper clipsyes

Paper feedermanual

Particle size (in mm)3,9 mm

Power consumption350 W

Power supply-

Recommended number of users1-3

Run time10min

Security levelP-2

Sheet capacity (80g/sqm)*13 sheets

Speed (m/min)6

Waste collection volume (in l)30 l

DAHLE PaperSAFE® 60

Sku23060-16167

ExcerptSmall document shredder for office and home use with strip cut P-2

DimensionsSelect a variation

BrandDahle

Cardsyes

Cut typeStrip cut

Entry width in mm220

Material to be cutCards, Paper

Noise level when idle (db(A))70 dB(A)

Paper clips-

Paper feedermanual

Particle size (in mm)6 x mm

Power consumption130 W

Power supply230 V

Recommended number of users1-3

Run time5min

Security levelP-2

Sheet capacity (80g/sqm)*1 - 6 sheets

Speed (m/min)6

Waste collection volume (in l)11 l

DAHLE PaperSAFE® 100

Sku23100-16168

ExcerptSmall document shredder for office and home use with particle cut P-4

DimensionsSelect a variation

BrandDahle

Cardsyes

Cut typeParticle cut

Entry width in mm220

Material to be cutCards, Paper

Noise level when idle (db(A))70 dB(A)

Paper clips-

Paper feedermanual

Particle size (in mm)5 x 18 mm

Power consumption150 W

Power supply230 V

Recommended number of users1-3

Run time25min

Security levelP-4

Sheet capacity (80g/sqm)*1 - 5 sheets

Speed (m/min)3

Waste collection volume (in l)12 l

DAHLE PaperSAFE® 120

Sku23120-16169

ExcerptSmall document shredder for office and home use with particle cut P-4

DimensionsSelect a variation

BrandDahle

Cardsyes

Cut typeParticle cut

Entry width in mm220

Material to be cutCards, Paper

Noise level when idle (db(A))65 dB(A)

Paper clipsyes

Paper feedermanual

Particle size (in mm)5 x 18 mm

Power consumption205 W

Power supply230 V

Recommended number of users1-3

Run time25min

Security levelP-4

Sheet capacity (80g/sqm)*1 - 8 sheets

Speed (m/min)3.5

Waste collection volume (in l)12 l

DAHLE PaperSAFE® 140

Sku23140-16170

ExcerptSmall document shredder for office and home use with particle cut P-4

DimensionsSelect a variation

BrandDahle

Cardsyes

Cut typeParticle cut

Entry width in mm220

Material to be cutCards, Paper

Noise level when idle (db(A))65 dB(A)

Paper clipsyes

Paper feedermanual

Particle size (in mm)5 x 18 mm

Power consumption220 W

Power supply230 V

Recommended number of users1-3

Run time20min

Security levelP-4

Sheet capacity (80g/sqm)*1 - 10 sheets

Speed (m/min)3.5

Waste collection volume (in l)12 l

DAHLE 203

Frequently Asked Questions

Can I use any oil for my document shredder?

How do I oil my document shredder correctly?

What document shredder oil should I use – oil paper or bottled oil?

What are the security levels?

What may be shredded?

Which document shredder suits me?

How large should the shredder be (collection volume)?

What is the operating time of my shredder?

Do document shredders need to be serviced?

What is strip cut?

What is crosscut?

What is Particle cut?

What types of cuts are there in document shredders?

Compare with similar products

Related products

Login