DAHLE ShredMATIC® 300 P5

Professional document shredder with automatic paper feeder and P-5 particle cut

  • Convenient deskside document shredder
  • MHP® (Matrix High-Performance) cutting rollers: high-quality compound steel rollers for a guaranteed long service life
  • Patented manufacturing process conserves resources by using significantly less raw material compared to production of traditional cutting rollers
  • Higher performance and greater convenience thanks to MHP cutting rollers
  • With automatic motor cut-out after 10 minutes without use
  • Integrated photoelectric sensor for automatic start-stop function enables fast availability and safe use
  • Automatic paper reverse function clears excess paper
  • Convenient feeding and reversing function for manual control
  • Automatic safety shut-off when the waste container is full or open
  • Inspection window as optical waste level indicator
  • Autofeed function shreds up to 300 sheets (80 gsm) in a single load, with lockable paper feeder
  • Overload indicator
  • Manual paper feeder, 9-11 sheets of paper (80 gsm)
  • Overheating protection with optical indicator
  • Pull-out waste container
  • Powerful motor ensures high performance and longer run times
  • Convenient swivel castors for greater mobility
Show more

0,00 

SKU: 35322-16922 Categories: , ,

Shreds stacks of up to 300 sheets at 80 g/m²

Shreds stacks of up to 300 sheets at 80 g/m²
Manual feed of 9–11 sheets possible

Manual feed of 9–11 sheets possible

Reliably destroys cards

Reliably destroys cards
Clearly designed, user-friendly control panel

Clearly designed, user-friendly control panel

Entry width in mm 220
Sheet capacity (80g/sqm)* 11 – 300 sheets
Particle size (in mm) 2 x 15 mm
Run time 480min
Autofeed run time 480min
Cards yes
Paper clips yes
Waste collection volume (in l) 40 l
Noise level when idle (db(A)) 60 dB(A)
Power consumption 650 W
Speed (m/min) 2.5
Cut type Particle cut
Paper feeder automatic
Security level P-5
Material to be cut Cards
Paper
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.

Frequently Asked Questions

Can I use any oil for my document shredder?

Our document shredder oils are specially designed for regularly shredder oiling making them perfect for maintenance of your device. Our document shredder oils are biodegradable meaning any leftovers from the oiling process can be easily disposed...

Read More

How do I oil my document shredder correctly?

Some of our Dahle Cross Cut document shredders need to be regularly oiled to ensure their smooth function. Bottled Dahle document shredder oil or oil paper is perfect for this. Simply use bottled oil between two sheets of paper to ensure nothing...

Read More

What document shredder oil should I use – oil paper or bottled oil?

Both are suitable for maintenance of your document shredder. The only difference lies in the handling: oil paper is pre-prepared and ready to use. All you have to do is unpack it and feed it directly into the document shredder. For document...

Read More

What are the security levels?

ISO/IEC 66399 (DIN 21964) defines seven security levels for destroying data using document shredders. The security levels are named by abbreviating the respective type of data carrier and adding ascending numbers from 1 to 7, for example P-4. The...

Read More

What may be shredded?

Any DAHLE document shredder can easily destroy data in paper form, but some devices will also shred CDs, DVDs and cards. Many DAHLE document shredders have separate collection bins for paper, CDs, DVDs and cards, allowing you to separate and...

Read More

Which document shredder suits me?

Do you have piles of old documents, but you just can't find the right document shredder? Do you not know what to look for with all the technical details? With our interactive document shredders advisor you can find the right product in just a few...

Read More

How large should the shredder be (collection volume)?

The right waste collection volume for your document shredder depends on two factors. First, establish how many people will be using the document shredder. The more people use the device, the bigger the waste collection volume should be. As a rule...

Read More

What is the operating time of my shredder?

Every document shredder has an individual run time. Depending on the device’s cutting capacity, a document shredder can operate for a certain amount of time before it needs to be paused for a while. So run time refers to the amount of time for...

Read More

Do document shredders need to be serviced?

Ensuring that your document shredder has a long, trouble-free service life requires occasional maintenance. In addition to emptying the waste container, for some devices this includes oiling the cutting rollers. Oiling maintains your shredder’s...

Read More

What is strip cut?

Document shredders with strip cut shred a sheet of paper into multiple strips. The width of these strips depends on the security level. Strip cut does not always reliably prevent reproduction of the destroyed data, so this type of document...

Read More

What is crosscut?

Cross cut (also known as particle cut) means a sheet of paper is chopped into small particles. The sheet is cut both vertically and horizontally, so that only small particles are left over. The size of these particles depends on the security...

Read More

What is Particle cut?

Particle cut (also known as cross cut) means a sheet of paper is shredded into small particles. The sheet is sliced both vertically and horizontally, so small particles are all that remain after shredding. The size of these particles depends on...

Read More

What types of cuts are there in document shredders?

DAHLE document shredders come in three different cut types: strip cut, cross or particle cut, and micro cut. Cut types describe the kind of particles that are created when shredding a sheet of paper. Strip cut means the sheet is sliced into...

Read More

Compare with similar products

compare this product with similar products from this category

Current Product: DAHLE ShredMATIC® 300 P5
Sku35322-16922
ExcerptProfessional document shredder with automatic paper feeder and P-5 particle cut
DimensionsSelect a variation
Autofeed run time480min
BrandDahle
Cardsyes
CDs/DVDs-
Cut typeParticle cut
Entry width in mm220
FeaturesEnergy saving mode
Material to be cutCards, Paper
Noise level when idle (db(A))60 dB(A)
Paper clipsyes
Paper feederautomatic
Particle size (in mm)2 x 15 mm
Power consumption650 W
Power supply-
Run time480min
Security levelP-5
Sheet capacity (80g/sqm)*11 - 300 sheets
Speed (m/min)2.5
Waste collection volume (in l)40 l
DAHLE Deskside 204P
Sku52204-16985
ExcerptHigh-performance document shredder with 40 l waste collection volume and security level P-2
DimensionsSelect a variation
Autofeed run time-
BrandDahle
Cardsyes
CDs/DVDsyes
Cut typeStrip cut
Entry width in mm240
FeaturesEnergy saving mode, Oil-free operation
Material to be cutCards, CDs/DVDs, Paper
Noise level when idle (db(A))60 dB(A)
Paper clipsyes
Paper feedermanual
Particle size (in mm)-
Power consumption690 W
Power supply230 V
Run time40min
Security levelP-2
Sheet capacity (80g/sqm)*25 - 29 sheets
Speed (m/min)2
Waste collection volume (in l)40 l
DAHLE Deskside 404P
Sku52214-16989
ExcerptHigh-performance document shredder with 40 l waste collection volume and security level P-4
DimensionsSelect a variation
Autofeed run time-
BrandDahle
Cardsyes
CDs/DVDsyes
Cut typeParticle cut
Entry width in mm240
FeaturesEnergy saving mode, Oil-free operation
Material to be cutCards, CDs/DVDs, Paper
Noise level when idle (db(A))60 dB(A)
Paper clipsyes
Paper feedermanual
Particle size (in mm)4 mm 35 mm
Power consumption500 W
Power supply230 V
Run time65min
Security levelP-4
Sheet capacity (80g/sqm)*19 - 21 sheets
Speed (m/min)2.1
Waste collection volume (in l)40 l
DAHLE Deskside 504P
Sku52222-17004
ExcerptHigh-performance document shredder with 40 l waste collection volume and security level P-5
DimensionsSelect a variation
Autofeed run time-
BrandDahle
Cardsyes
CDs/DVDs-
Cut typeMicro cut
Entry width in mm240
FeaturesEnergy saving mode
Material to be cutPaper
Noise level when idle (db(A))60 dB(A)
Paper clipsyes
Paper feedermanual
Particle size (in mm)2 mm 15 mm
Power consumption570 W
Power supply230 V
Run time40min
Security levelP-5
Sheet capacity (80g/sqm)*13 - 15 sheets
Speed (m/min)2.1
Waste collection volume (in l)40 l
DAHLE PaperSAFE® 60
Sku23060-16167
ExcerptSmall document shredder for office and home use with strip cut P-2
DimensionsSelect a variation
Autofeed run time-
BrandDahle
Cardsyes
CDs/DVDs-
Cut typeStrip cut
Entry width in mm220
FeaturesOil-free operation
Material to be cutCards, Paper
Noise level when idle (db(A))70 dB(A)
Paper clips-
Paper feedermanual
Particle size (in mm)6 x mm
Power consumption130 W
Power supply230 V
Run time5min
Security levelP-2
Sheet capacity (80g/sqm)*1 - 6 sheets
Speed (m/min)6
Waste collection volume (in l)11 l

You may also like…

0,00 
Professional document shredder with manual paper feeder and P-5 particle cut
  • Shreds 11 – 13 sheets at a time
  • 60 l waste collection volume
  • Entry width up to 260 mm
0,00 
Universal document shredder with automatic paper feeder and particle cut P-4
  • Shreds up to 150 sheets in a single load
  • 25 l waste collection volume
  • Oil-free and low-maintenance.
0,00 
Powerful document shredder with automatic paper feeder and particle cut P-4
  • Shreds up to 300 sheets in a single load
  • 40 l waste collection volume
  • Oil-free and low-maintenance.
0,00 
DAHLE 20795 oil paper for all non-oil-free DAHLE cross-cut document shredders
0,00 
Professional document shredder with manual paper feeder and P-5 particle cut
  • Shreds 11 – 13 sheets at a time
  • 100 l waste collection volume
  • Entry width up to 260 mm
Compare Products