Novus Novus Hefter 020 1536 B15 Milieu 2 20230420135711 414470

Novus Novus Hefter 020 1536 B15 Milieu 20230420135641 414128

NOVUS B 15

Small office stapler with large insertion depth

Metal device with plastic top
Stapling convenience for brochures in A6 to A3 size
Non-slip base for firm standing
Top loading system with single staple guide
Movable anvil for temporary and permanent stapling
Weight: approx. 500 g

0,00 €

SKU: 020-1536 Categories: Brochure staplers, Staplers, Staplers & Perforators

Maximum number of sheets of 80 g/m² paper. The maximum capacity in this case is 25 sheets.

Tool with metal functional parts

Robust stapling for permanently binding documents together.

Temporary stapling makes it easy to keep papers together for short periods.The advantage: staples can be removed quickly and easily.

This device can process staples of type 24/6 SUPER. A maximum of 100 staples can be inserted.

This device can process staples of type 26/6 SUPER. A maximum of 150 staples can be inserted.

With the top-loading mechanism, the staples are inserted into the stapler after raising the top part.

Maximum stapling depth is 250 mm.

Novus offers a warranty of 10 years when handled in a proper manner

The quality statement "German Engineering" ensures that a product was developed according to German quality standards by our engineering experts. All Novus products carrying the "German Engineering by Novus" signet are manufactured in our own plants around the world by our own workforce, managed and supervised by our headquarters in Germany.

This machine bears the GS approval of product safety.

Color	light grey/deep black
Material	Tool with metal functional parts
Sheet capacity (80g/sqm)*	25
Stapling method	permanent Removable
Loading capacity	100 x 24/6 150 x 26/6
Insertion depth	250 mm
Loading system	Top loading system
Staple guide	single staple guide
Guarantee	10 years
Compliance	This machine bears the GS approval of product safety.
German Engineering by Novus	yes
Model	Office stapler
Staple type	24/6 26/6
Area of application	Special tasks
Sustainability	Environmentally friendly production
Range	Smart

* Maximum number of sheets (80 g/sqm) which can be cut in a single pass

Frequently Asked Questions

Where can I find the serial number on my Dahle product?

The serial number of your Dahle device is printed on the white sticker attached to the product. The number is labelled as “identification” and consists of a combination of numbers and letters. On shredders, the information is printed on a...

Read More

Where can I find the article number on my Dahle product?

See the white sticker on the back of the shredder. You can find the item number listed there as “Product Code”. The item number consists of two sets of digits connected by a hyphen.

Read More

Why can I only staple once even though the stapler is filled with staples?

You are not using original Novus stacks. The stacks from other manufacturers are incorrectly bent and therefore jam on the stacking carrier and cannot be pushed forward. Original Novus stacks are absolutely true to size and can be easily pushed...

Read More

Why does the perforator (B225, B240, B260, B425) stay down after actuation and does not release the paper?

The machine was held at an angle when punching and the lock for the rest position is engaged. To unlock, hold the perforator straight and press again. We recommend punching on the table as shown in the picture, then the perforator cannot lock.

Read More

Why do the staple ends not go far enough through the paper when stapling?

For the paper thickness, the staple is chosen too short. The following basic rule applies: 10 sheets of standard paper (80g/sqm) are approx. 1 mm thick. The paper stack height plus 3 mm gives the appropriate staple leg length.

Read More

Why do the staple ends come out at the top when stapling?

For the paper thickness, the staple is chosen too long. The following basic rule applies: 10 sheets of standard paper (80g/sqm) are approx. 1 mm thick. The paper stack height plus 3 mm gives the appropriate staple leg length.

Read More