DAHLE ShredMATIC® 90

Powerful document shredder with automatic paper feeder and particle cut P-4

Intelligent document shredder for desk-side use
Oil- and maintenance-free operation
Extra-small particles allow for less frequent emptying
Integrated photoelectric sensor for automatic start-stop function enables fast availability and safe use
Automatic paper reverse function clears excess paper
Convenient feeding and reversing function for manual control
Automatic safety shut-off when the waste container is full or the door is open
Optical waste level indicator
Autofeed function shreds up to 90 sheets (80 gsm) in a single load
Overload indicator
Manual feed of up to 10 sheets possible
Overheating protection with optical indicator
Pull-out waste container
Convenient casters for greater mobility
Two inspection flaps for easy cleaning of automatic paper feeder

0,00 €

SKU: 35090-16180 Categories: Document shredders, Home office shredders, Office shredders, Shredders

Deskside document shredders:performance and convenience directly at the desk

Cross cut

The ‘autofeed’ function ensures automatic feed of complete stacks of paper (80 gsm)

Comfortable and environmentally friendly shredding - no time-consuming lubrication of the cutting cylinders required

Convenient feeding and reversing function for manual control

Integrated light barrier for automatic start and stop

Convenient castors

Shreds up to 90 sheets in a single load

Reliably destroys cards

Entry width in mm	222
Sheet capacity (80g/sqm)*	1 – 90 sheets
Particle size (in mm)	4 x 12 mm
Run time	60min
Autofeed run time	60min
Cards	yes
Paper clips	yes
Waste collection volume (in l)	23 l
Noise level when idle (db(A))	62 dB(A)
Power consumption	240 W
Power supply	230 V
Speed (m/min)	1.8
Cut type	Particle cut
Paper feeder	automatic
Security level	P-4
Material to be cut	Cards Paper

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.

Frequently Asked Questions

Can I use any oil for my document shredder?

Our document shredder oils are specially designed for regularly shredder oiling making them perfect for maintenance of your device. Our document shredder oils are biodegradable meaning any leftovers from the oiling process can be easily disposed...

Read More

How do I oil my document shredder correctly?

Some of our Dahle Cross Cut document shredders need to be regularly oiled to ensure their smooth function. Bottled Dahle document shredder oil or oil paper is perfect for this. Simply use bottled oil between two sheets of paper to ensure nothing...

Read More

What document shredder oil should I use – oil paper or bottled oil?

Both are suitable for maintenance of your document shredder. The only difference lies in the handling: oil paper is pre-prepared and ready to use. All you have to do is unpack it and feed it directly into the document shredder. For document...

Read More

What are the security levels?

ISO/IEC 66399 (DIN 21964) defines seven security levels for destroying data using document shredders. The security levels are named by abbreviating the respective type of data carrier and adding ascending numbers from 1 to 7, for example P-4. The...

Read More

What may be shredded?

Any DAHLE document shredder can easily destroy data in paper form, but some devices will also shred CDs, DVDs and cards. Many DAHLE document shredders have separate collection bins for paper, CDs, DVDs and cards, allowing you to separate and...

Read More

Which document shredder suits me?

Do you have piles of old documents, but you just can't find the right document shredder? Do you not know what to look for with all the technical details? With our interactive document shredders advisor you can find the right product in just a few...

Read More

How large should the shredder be (collection volume)?

The right waste collection volume for your document shredder depends on two factors. First, establish how many people will be using the document shredder. The more people use the device, the bigger the waste collection volume should be. As a rule...

Read More

What is the operating time of my shredder?

Every document shredder has an individual run time. Depending on the device’s cutting capacity, a document shredder can operate for a certain amount of time before it needs to be paused for a while. So run time refers to the amount of time for...

Read More

Do document shredders need to be serviced?

Ensuring that your document shredder has a long, trouble-free service life requires occasional maintenance. In addition to emptying the waste container, for some devices this includes oiling the cutting rollers. Oiling maintains your shredder’s...

Read More

What is strip cut?

Document shredders with strip cut shred a sheet of paper into multiple strips. The width of these strips depends on the security level. Strip cut does not always reliably prevent reproduction of the destroyed data, so this type of document...

Read More

What is crosscut?

Cross cut (also known as particle cut) means a sheet of paper is chopped into small particles. The sheet is cut both vertically and horizontally, so that only small particles are left over. The size of these particles depends on the security...

Read More

What is Particle cut?

Particle cut (also known as cross cut) means a sheet of paper is shredded into small particles. The sheet is sliced both vertically and horizontally, so small particles are all that remain after shredding. The size of these particles depends on...

Read More

What types of cuts are there in document shredders?

DAHLE document shredders come in three different cut types: strip cut, cross or particle cut, and micro cut. Cut types describe the kind of particles that are created when shredding a sheet of paper. Strip cut means the sheet is sliced into...

Read More

Product datasheet

Brochure

User-Information

Compare with similar products

compare this product with similar products from this category

Current Product: DAHLE ShredMATIC® 90

Sku35090-16180

ExcerptPowerful document shredder with automatic paper feeder and particle cut P-4

DimensionsSelect a variation

Autofeed run time60min

BrandDahle

Cardsyes

Cut typeParticle cut

Entry width in mm222

Material to be cutCards, Paper

Noise level when idle (db(A))62 dB(A)

Paper clipsyes

Paper feederautomatic

Particle size (in mm)4 x 12 mm

Power consumption240 W

Power supply230 V

Recommended number of users1-3

Run time60min

Security levelP-4

Sheet capacity (80g/sqm)*1 - 90 sheets

Speed (m/min)1.8

Waste collection volume (in l)23 l

DAHLE PaperSAFE® 60

Sku23060-16167

ExcerptSmall document shredder for office and home use with strip cut P-2

DimensionsSelect a variation

Autofeed run time-

BrandDahle

Cardsyes

Cut typeStrip cut

Entry width in mm220

Material to be cutCards, Paper

Noise level when idle (db(A))70 dB(A)

Paper clips-

Paper feedermanual

Particle size (in mm)6 x mm

Power consumption130 W

Power supply230 V

Recommended number of users1-3

Run time5min

Security levelP-2

Sheet capacity (80g/sqm)*1 - 6 sheets

Speed (m/min)6

Waste collection volume (in l)11 l

DAHLE PaperSAFE® 100

Sku23100-16168

ExcerptSmall document shredder for office and home use with particle cut P-4

DimensionsSelect a variation

Autofeed run time-

BrandDahle

Cardsyes

Cut typeParticle cut

Entry width in mm220

Material to be cutCards, Paper

Noise level when idle (db(A))70 dB(A)

Paper clips-

Paper feedermanual

Particle size (in mm)5 x 18 mm

Power consumption150 W

Power supply230 V

Recommended number of users1-3

Run time25min

Security levelP-4

Sheet capacity (80g/sqm)*1 - 5 sheets

Speed (m/min)3

Waste collection volume (in l)12 l

DAHLE PaperSAFE® 120

Sku23120-16169

ExcerptSmall document shredder for office and home use with particle cut P-4

DimensionsSelect a variation

Autofeed run time-

BrandDahle

Cardsyes

Cut typeParticle cut

Entry width in mm220

Material to be cutCards, Paper

Noise level when idle (db(A))65 dB(A)

Paper clipsyes

Paper feedermanual

Particle size (in mm)5 x 18 mm

Power consumption205 W

Power supply230 V

Recommended number of users1-3

Run time25min

Security levelP-4

Sheet capacity (80g/sqm)*1 - 8 sheets

Speed (m/min)3.5

Waste collection volume (in l)12 l

DAHLE PaperSAFE® 140

Sku23140-16170

ExcerptSmall document shredder for office and home use with particle cut P-4

DimensionsSelect a variation

Autofeed run time-

BrandDahle

Cardsyes

Cut typeParticle cut

Entry width in mm220

Material to be cutCards, Paper

Noise level when idle (db(A))65 dB(A)

Paper clipsyes

Paper feedermanual

Particle size (in mm)5 x 18 mm

Power consumption220 W

Power supply230 V

Recommended number of users1-3

Run time20min

Security levelP-4

Sheet capacity (80g/sqm)*1 - 10 sheets

Speed (m/min)3.5

Waste collection volume (in l)12 l

DAHLE ShredMATIC® 90

Frequently Asked Questions

Can I use any oil for my document shredder?

How do I oil my document shredder correctly?

What document shredder oil should I use – oil paper or bottled oil?

What are the security levels?

What may be shredded?

Which document shredder suits me?

How large should the shredder be (collection volume)?

What is the operating time of my shredder?

Do document shredders need to be serviced?

What is strip cut?

What is crosscut?

What is Particle cut?

What types of cuts are there in document shredders?

Compare with similar products

Related products

Login