DAHLE PaperSAFE® 420

High-security document shredder for use at your desk with particle cut P-5

  • Intelligent document shredder for desk-side use
  • Extra-small particles allow for less frequent emptying
  • Separate drive for the reliable shredding of CDs and DVDs into four strips 3.0 cm in width
  • Energy-saving standby mode
  • Integrated photoelectric sensor for automatic start-stop function enables fast availability and safe use
  • Automatic paper reverse function clears excess paper
  • Convenient feeding and reversing function for manual control
  • Automatic safety shut-off
  • Optical waste level indicator
  • Self-cleaning cutting rollers
  • Sheet remnant shredding with full waste container for safe destruction of sensitive data.
  • Overload indicator
  • Overheating protection with optical indicator
  • Pull-out waste container
  • Convenient casters for greater mobility
  • Angled cold device cable
Show more

0,00 

SKU: 23420-16174 Categories: , , ,

Reliably destroys cards

Reliably destroys cards
Reliably destroys CDs and DVDs

Reliably destroys CDs and DVDs

Angled cold device cable

Angled cold device cable
Extra-small particles make optimal use of waste container volume

Extra-small particles make optimal use of waste container volume

Two separate shredding mechanisms for paper and for CDs, DVDs, bank cards and credit cards

Two separate shredding mechanisms for paper and for CDs, DVDs, bank cards and credit cards
Separate collection bin for CDs, DVDs, bank cards and credit cards makes waste separation easy

Separate collection bin for CDs, DVDs, bank cards and credit cards makes waste separation easy

Entry width in mm 224
Sheet capacity (80g/sqm)* 1 – 10 sheets
Particle size (in mm) 2 x 15 mm
Run time 480min
CDs/DVDs yes
Cards yes
Paper clips yes
Waste collection volume (in l) 25 l
Noise level when idle (db(A)) 60 dB(A)
Power consumption 350 W
Power supply 230 V
Speed (m/min) 2.5
Cut type Micro cut
Particle cut
Paper feeder manual
Security level P-5
Material to be cut Cards
CDs/DVDs
Paper
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.

Frequently Asked Questions

Can I use any oil for my document shredder?

Our document shredder oils are specially designed for regularly shredder oiling making them perfect for maintenance of your device. Our document shredder oils are biodegradable meaning any leftovers from the oiling process can be easily disposed...

Read More

How do I oil my document shredder correctly?

Some of our Dahle Cross Cut document shredders need to be regularly oiled to ensure their smooth function. Bottled Dahle document shredder oil or oil paper is perfect for this. Simply use bottled oil between two sheets of paper to ensure nothing...

Read More

What document shredder oil should I use – oil paper or bottled oil?

Both are suitable for maintenance of your document shredder. The only difference lies in the handling: oil paper is pre-prepared and ready to use. All you have to do is unpack it and feed it directly into the document shredder. For document...

Read More

What are the security levels?

ISO/IEC 66399 (DIN 21964) defines seven security levels for destroying data using document shredders. The security levels are named by abbreviating the respective type of data carrier and adding ascending numbers from 1 to 7, for example P-4. The...

Read More

What may be shredded?

Any DAHLE document shredder can easily destroy data in paper form, but some devices will also shred CDs, DVDs and cards. Many DAHLE document shredders have separate collection bins for paper, CDs, DVDs and cards, allowing you to separate and...

Read More

Which document shredder suits me?

Do you have piles of old documents, but you just can't find the right document shredder? Do you not know what to look for with all the technical details? With our interactive document shredders advisor you can find the right product in just a few...

Read More

How large should the shredder be (collection volume)?

The right waste collection volume for your document shredder depends on two factors. First, establish how many people will be using the document shredder. The more people use the device, the bigger the waste collection volume should be. As a rule...

Read More

What is the operating time of my shredder?

Every document shredder has an individual run time. Depending on the device’s cutting capacity, a document shredder can operate for a certain amount of time before it needs to be paused for a while. So run time refers to the amount of time for...

Read More

Do document shredders need to be serviced?

Ensuring that your document shredder has a long, trouble-free service life requires occasional maintenance. In addition to emptying the waste container, for some devices this includes oiling the cutting rollers. Oiling maintains your shredder’s...

Read More

What is strip cut?

Document shredders with strip cut shred a sheet of paper into multiple strips. The width of these strips depends on the security level. Strip cut does not always reliably prevent reproduction of the destroyed data, so this type of document...

Read More

What is crosscut?

Cross cut (also known as particle cut) means a sheet of paper is chopped into small particles. The sheet is cut both vertically and horizontally, so that only small particles are left over. The size of these particles depends on the security...

Read More

What is Particle cut?

Particle cut (also known as cross cut) means a sheet of paper is shredded into small particles. The sheet is sliced both vertically and horizontally, so small particles are all that remain after shredding. The size of these particles depends on...

Read More

What types of cuts are there in document shredders?

DAHLE document shredders come in three different cut types: strip cut, cross or particle cut, and micro cut. Cut types describe the kind of particles that are created when shredding a sheet of paper. Strip cut means the sheet is sliced into...

Read More

Compare with similar products

compare this product with similar products from this category

Current Product: DAHLE PaperSAFE® 420
Sku23420-16174
ExcerptHigh-security document shredder for use at your desk with particle cut P-5
DimensionsSelect a variation
BrandDahle
Cardsyes
CDs/DVDsyes
Cut typeMicro cut, Particle cut
Entry width in mm224
Material to be cutCards, CDs/DVDs, Paper
Noise level when idle (db(A))60 dB(A)
Paper clipsyes
Paper feedermanual
Particle size (in mm)2 x 15 mm
Power consumption350 W
Power supply230 V
Run time480min
Security levelP-5
Sheet capacity (80g/sqm)*1 - 10 sheets
Speed (m/min)2.5
Waste collection volume (in l)25 l
DAHLE PaperSAFE® 60
Sku23060-16167
ExcerptSmall document shredder for office and home use with strip cut P-2
DimensionsSelect a variation
BrandDahle
Cardsyes
CDs/DVDs-
Cut typeStrip cut
Entry width in mm220
Material to be cutCards, Paper
Noise level when idle (db(A))70 dB(A)
Paper clips-
Paper feedermanual
Particle size (in mm)6 x mm
Power consumption130 W
Power supply230 V
Run time5min
Security levelP-2
Sheet capacity (80g/sqm)*1 - 6 sheets
Speed (m/min)6
Waste collection volume (in l)11 l
DAHLE PaperSAFE® 100
Sku23100-16168
ExcerptSmall document shredder for office and home use with particle cut P-4
DimensionsSelect a variation
BrandDahle
Cardsyes
CDs/DVDs-
Cut typeParticle cut
Entry width in mm220
Material to be cutCards, Paper
Noise level when idle (db(A))70 dB(A)
Paper clips-
Paper feedermanual
Particle size (in mm)5 x 18 mm
Power consumption150 W
Power supply230 V
Run time25min
Security levelP-4
Sheet capacity (80g/sqm)*1 - 5 sheets
Speed (m/min)3
Waste collection volume (in l)12 l
DAHLE PaperSAFE® 120
Sku23120-16169
ExcerptSmall document shredder for office and home use with particle cut P-4
DimensionsSelect a variation
BrandDahle
Cardsyes
CDs/DVDs-
Cut typeParticle cut
Entry width in mm220
Material to be cutCards, Paper
Noise level when idle (db(A))65 dB(A)
Paper clipsyes
Paper feedermanual
Particle size (in mm)5 x 18 mm
Power consumption205 W
Power supply230 V
Run time25min
Security levelP-4
Sheet capacity (80g/sqm)*1 - 8 sheets
Speed (m/min)3.5
Waste collection volume (in l)12 l
DAHLE PaperSAFE® 140
Sku23140-16170
ExcerptSmall document shredder for office and home use with particle cut P-4
DimensionsSelect a variation
BrandDahle
Cardsyes
CDs/DVDs-
Cut typeParticle cut
Entry width in mm220
Material to be cutCards, Paper
Noise level when idle (db(A))65 dB(A)
Paper clipsyes
Paper feedermanual
Particle size (in mm)5 x 18 mm
Power consumption220 W
Power supply230 V
Run time20min
Security levelP-4
Sheet capacity (80g/sqm)*1 - 10 sheets
Speed (m/min)3.5
Waste collection volume (in l)12 l

Optional Accessories …

0,00 
Replacement blades for cutter 10890, 10891, 10892 (self-service pack: 10 each)
black
blue
grey
0,00 
Attractively priced office perforator for professional use
0,00 
Industrial pack of laminating pouches to protect important documents - DIN A5 (2 x 80 mic)
black
silver
white
0,00 
Smart LED desktop luminaire with unique, rotatable light panels for individually adjustable direct and indirect light options, and a practical multi-sensor for automatic operation.
silver
0,00 
  • Organisational rails for desks
  • with system clamp
0,00 
Professional document shredder with manual paper feeder and P4 particle cut
  • Shreds 15 – 17 sheets at a time
  • 100 l waste collection volume
  • Oil-free and low-maintenance.
0,00 
Titanium-coated scissors in hardened special steel
  • Size: 20 cm
  • Right-handed scissors
  • Paper scissors
0,00 
Extension plate for mounting two connect plates to one connect joint
0,00 
Robust beginner’s device for various applications involving aluminium, steel and copper rivet fastenings, incl. patented gauge on the handle for measuring rivet size.
  • A2,5 / A3 / A4 / A5
  • S3 / S4
  • C4
0,00 
Powerful stapling pliers with ergonomic handle
Available late 2023
0,00 
Powerful professional cordless tacker for perfectly attaching a wide variety of fabrics, textiles and decorative mouldings on building sites and in workshops
  • A/H 6-14 mm
  • E 16 mm
0,00 
Professional document shredder with manual paper feeder and P2 strip cut
  • Shreds up to 22 sheets at a time
  • 60 l waste collection volume
  • with CleanTEC® fine dust filter
0,00 
Wall rail set with self-adhesive, powder-coated metal rail, complete with magnets (50 cm)
0,00 
Industrial pack of laminating pouches to protect important documents - DIN A6 (2 x 125 mic)
0,00 
Professional document shredder with manual paper feeder and P7 micro cut
  • Shreds up to 9 sheets at a time
  • 160 l waste collection volume
  • with CleanTEC® fine dust filter
anthracite
light grey
0,00 
Compact design offering a high carrying capacity making it particularly suitable for lager and heavier-type telephones
0,00 
Aluminium column with two slots and system clamp 1
0,00 
Professional rotary trimmer for daily use (A3)
  • Cutting performance up to 20 sheets
  • Cutting length up to 510 mm
  • Cutting capacity up to 2 mm
0,00 
Aluminium blind rivet in a diameter of 5 mm, ideal for fastening of non-ferrous metal, Plastic, Lightweight construction material, Leather and Fabrics
0,00 
Display with 24 printed children's scissors; assorted colours (5 inch)
  • Size: 13 cm
  • Right- and left-handed scissors
  • Children's scissors
0,00 
Accessory set for the block perforator B2200
0,00 
Professional document shredder with manual paper feeder and P2 strip cut
  • Shreds up to 26 sheets at a time
  • 140 l waste collection volume
  • with CleanTEC® fine dust filter
0,00 
cutter head for Rotary Trimmer, cutter head deckle-edge cut Dahle 963. Suitable for model: Dahle 507.
Novus POS clamp HD

Novus POS clamp HD

System clamp for mounting on counters
0,00 
For the particularly flat mounting of monitors on the wall
  • VESA QuickMount wall mount
  • for wall mounting
  • for screens max. 25 kg
0,00 
Premium rotary trimmer for everyday use (A1)
  • Cutting performance up to 25 sheets
  • Cutting length up to 920 mm
  • Cutting capacity up to 2,5 mm
0,00 
Suitable connect plate for EC-Cash Terminal IPP 480
0,00 
High-quality 2-part monitor arm for mounting a monitor directly to an organisational wall
0,00 
Canister lead pointer with integrated cutter
0,00 
Twin-hole canister pencil sharpener in plastic with metal sharpening cutters
0,00 
DAHLE 660 automatic safety guard for the DAHLE 561 guillotine
0,00 
A3 laminator, photographic quality, with 4 silicone rollers
0,00 
Commercial-quality guillotine with manual D-bar clamp
  • Cutting performance up to 35 sheets
  • Cutting length up to 700 mm
  • Cutting capacity up to 3,5 mm
0,00 
Staples for heavy-duty staplers. Leg length of 20 mm and high-strength steel wire
Available soon
0,00 
Professional electric tacker for perfectly attaching a wide variety of sheeting and decorative mouldings on building sites and in workshops
  • D/G 6-14 mm
  • E 16 mm
0,00 
Staples for heavy-duty staplers. Leg length of 10 mm and high-strength steel wire
Available soon
0,00 
Professional electric tacker for perfectly attaching a wide variety of fabrics, textiles and decorative mouldings on building sites and in workshops
  • A/H 6-14 mm
  • E 16 mm
0,00 
Practical entry-level guillotine for hobby use
  • Cutting performance up to 8 sheets
  • Cutting length up to 320 mm
  • Cutting capacity up to 0,8 mm
green
grey
red
0,00 
The elegantly designed classic among Novus staplers
0,00 
Adhesive edge cover for grommet holes in wooden boards
0,00 
Connect plate for EC Cash Terminal Verifone X990
0,00 
Industrial pack of laminating pouches to protect important documents - DIN A6 (2 x 80 mic)
0,00 
Sustainable stapler for domestic and home-office use
0,00 
Creative set with three cutting heads for model 507 (third generation)
0,00 
Ergonomically designed flat-clinch stapling pliers
0,00 
Universal connect plate to attach all popular tablets
Available soon
0,00 
Small, powerful electric tacker for attaching fabrics and textiles, optimal for interior decorating and workshop use
  • A 6-14 mm
  • E 16 mm
anthracite
light grey
0,00 
Wall mount in plastic for attachment to the wall, depending on the wall texture
0,00 
Back stop Dahle 653
anthracite
light grey
0,00 
Clamp for mounting on desktops
0,00 
Sustainable heavy-duty stapler for bigger jobs up to 140 sheets
0,00 
Suitable connect plate for printer sams4s G-Cube 100
0,00 
Professional document shredder with manual paper feeder and P2 strip cut
  • Shreds up to 13 sheets at a time
  • 30 l waste collection volume
  • Oil-free and low-maintenance.
black
silver
white
0,00 
Smart designed free-standing LED luminaire with unique, rotatable light panels for individually adjustable direct and indirect light options, and a practical multipurpose sensor for automatic operation.
0,00 
Lightweight hammer tacker for processing fine wire staples for universal use.
  • H 4-6 mm
0,00 
Small, high-quality multi-purpose box for attachment to office-organisation walls
0,00 
High quality infinitely height adjustable 1-part monitor support arm
  • TSS System monitor support arm
  • for TSS columns
  • for screens up to 32", max. 15 kg
0,00 
Aluminium blind rivet in a diameter of 4 mm, ideal for fastening of non-ferrous metal, Plastic, Lightweight construction material, Leather and Fabrics
0,00 
Professional document shredder with manual paper feeder and P5 particle cut
  • Shreds 11 – 13 sheets at a time
  • 100 l waste collection volume
  • with CleanTEC® fine dust filter
0,00 
Printed children's scissors
  • Size: 13 cm
  • Right-handed scissors
  • Children's scissors
0,00 
six flat screens, no problem for the NOVUS Tetra-Support-System
  • TSS Telescope multi-screen solution
  • with drilling screw fitting
  • for 6 screens with max. width 665 mm
black
silver
white
0,00 
Clamp, especially for mounting on big desktops
0,00 
Universal tablet frame for 10.5-inch Apple iPads
0,00 
Printed children's scissors
  • Size: 14 cm
  • Left-handed scissors
  • Children's scissors
0,00 
Professional document shredder with manual paper feeder and P4 particle cut
  • Shreds 24 – 26 sheets at a time
  • 140 l waste collection volume
  • Oil-free and low-maintenance.
Novus POS clamp HD

Novus POS clamp HD

System clamp for mounting on counters
0,00 
Professional workshop guillotine for cutting up to A1 size
  • Cutting length up to 1.100 mm
  • Cutting capacity up to 4 mm
0,00 
Suitable connect plate for EC-Cash Terminal CCV Pad Next
0,00 
Industrial pack of laminating pouches to protect important documents - DIN A4 (2 x 80 mic)
0,00 
Three screen solution for a much better productivity
  • TSS multi-screen solution on the column
  • with drilling screw fitting
  • for 3 screens with max. width 630 mm
0,00 
Professional document shredder with manual paper feeder and P7 micro cut
  • Shreds up to 5 sheets at a time
  • 60 l waste collection volume
  • with automatic oiler
0,00 
Suitable connect plate for EC-Cash Terminal SumUp Air
0,00 
The inexpensive heavy-duty stapler for all large stapling jobs involving up to 100 sheets of paper
0,00 
Professional document shredder with manual paper feeder and P5 particle cut
  • Shreds 17 – 19 sheets at a time
  • 140 l waste collection volume
  • Entry width up to 310 mm
black
silver
white
0,00 
Clamp for mounting on desktops
black / white
green/white
grey/black
0,00 
Manual pencil sharpener with high-quality steel cutters and adjustable tip shape
0,00 
HOME scissors manufactured from special hardened scissor steel
  • Size: Practical set of three scissors for different types of cutting work (5, 6, 8 Inch)
  • Right-handed scissors
  • Scissor set
black
silver
white
0,00 
2-part monitor supporting arm with gas spring technology for comfortable, ergonomic adjustment
  • Two-part dynamic monitor arm
  • For use with special mounts
  • for screens up to 27", max. 7 kg
black
silver
white
0,00 
Smart LED desktop luminaire with slim-line 2-part aluminium support arm and internal cable routing
black/grey
blue shiny
grey shiny
red shiny
0,00 
Elegant, handy set consisting of stapler E 15 and perforator E 210
Novus POS clamp HD

Novus POS clamp HD

System clamp for mounting on counters
0,00 
Laminator with two heated silicone rollers (A3)
0,00 
Wall bracket for attachment to the wall, depending on the wall texture
  • Wall mount, swivelling and tiltable
  • for wall mounting
  • for screens max. 10 kg
0,00 
Professional document shredder with manual paper feeder and P2 strip cut
  • Shreds up to 19 sheets at a time
  • 100 l waste collection volume
  • with CleanTEC® fine dust filter
0,00 
High-quality, short POS support arm for mounting terminals and screens
black
white
0,00 
Electric pencil sharpener with 230 V mains connection
0,00 
Industrial pack of laminating pouches to protect important documents - Badge (2 x 125 mic)
0,00 
Document shredder-waste bags Dahle 20705 with 64 l / 117 l waste volume
0,00 
High-quality magnetic board wiper
0,00 
Professional document shredder with manual paper feeder and P5 particle cut
  • Shreds 11 – 13 sheets at a time
  • 60 l waste collection volume
  • with CleanTEC® fine dust filter
0,00 
High-quality professional scissors with precision-ground blades in high-quality stainless steel
  • Size: 26 cm
  • Right-handed scissors
  • Paper scissors
0,00 
MEGA M