DAHLE ShredMATIC® 150

Universal document shredder with automatic paper feeder and particle cut P-4

  • Intelligent autofeed document shredder with automatic paper feeder for desk-side use
  • Oil- and maintenance-free operation
  • Extra-small particles allow for less frequent emptying
  • Integrated photoelectric sensor for automatic start-stop function enables fast availability and safe use
  • Automatic paper reverse function clears excess paper
  • Convenient feeding and reversing function for manual control
  • Automatic safety shut-off when the waste container is full or the door is open
  • Inspection window as optical waste level indicator
  • Autofeed function shreds up to 150 sheets (80 gsm) in a single load
  • Overload indicator
  • Manual feed of 7-9 sheets possible
  • Overheating protection with optical indicator
  • Pull-out waste container
  • Convenient casters for greater mobility
Show more

0,00 

SKU: 35150-16165 Categories: , , ,

Manual feed of 7-9 sheets possible

Manual feed of 7-9 sheets possible
Clearly designed, user-friendly control panel

Clearly designed, user-friendly control panel

Autofeed function shreds up to 150 sheets (80 gsm) in a single load

Autofeed function shreds up to 150 sheets (80 gsm) in a single load
Reliably destroys cards

Reliably destroys cards

Convenient castors

Convenient castors
Entry width in mm 220
Sheet capacity (80g/sqm)* 1 – 150 sheets
Particle size (in mm) 4 x 12 mm
Security levels P-4/F-1/T-4/E-3
Run time 90min
Autofeed run time 90min
Cards yes
Paper clips yes
Waste collection volume (in l) 25 l
Noise level when idle (db(A)) 60 dB(A)
Power consumption 180 W
Power supply 230 V
Speed (m/min) 1.8
Cut type Particle cut
Paper feeder automatic
* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz, 120V/60Hz). Non-conformances can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.

Frequently Asked Questions

Where can I find the serial number on my Dahle product?

The serial number of your Dahle device is printed on the white sticker attached to the product. The number is labelled as “identification” and consists of a combination of numbers and letters. On shredders, the information is printed on a...

Read More

Where can I find the article number on my Dahle product?

See the white sticker on the back of the shredder. You can find the item number listed there as “Product Code”. The item number consists of two sets of digits connected by a hyphen.

Read More

How do I remove the transport lock from my Dahle shredder?

You must remove the transport lock from your Dahle shredder before using it for the first time. This consists of two small screws which give the shredder added stability during transport. First, make sure that the shredder is disconnected from...

Read More

Can I use spray oil or other sprays to lubricate my shredder?

Never use spray oil, or any other sprays or aerosol lubricants, to lubricate your shredder. Using any kind of spray can cause gas to accumulate inside the device, which poses an extreme risk of fire and explosion. Only lubricate your Dahle...

Read More

Can I use any oil for my document shredder?

Our document shredder oils are specially designed for regularly shredder oiling making them perfect for maintenance of your device. Our document shredder oils are biodegradable meaning any leftovers from the oiling process can be easily disposed...

Read More

How do I oil my document shredder correctly?

Some of our Dahle Cross Cut document shredders need to be regularly oiled to ensure their smooth function. Bottled Dahle document shredder oil or oil paper is perfect for this. Simply use bottled oil between two sheets of paper to ensure nothing...

Read More

What document shredder oil should I use – oil paper or bottled oil?

Both are suitable for maintenance of your document shredder. The only difference lies in the handling: oil paper is pre-prepared and ready to use. All you have to do is unpack it and feed it directly into the document shredder. For document...

Read More

What are the security levels?

ISO/IEC 66399 (DIN 21964) defines seven security levels for destroying data using document shredders. The security levels are named by abbreviating the respective type of data carrier and adding ascending numbers from 1 to 7, for example P-4. The...

Read More

What may be shredded?

Any DAHLE document shredder can easily destroy data in paper form, but some devices will also shred CDs, DVDs and cards. Many DAHLE document shredders have separate collection bins for paper, CDs, DVDs and cards, allowing you to separate and...

Read More

Which document shredder suits me?

Do you have piles of old documents, but you just can't find the right document shredder? Do you not know what to look for with all the technical details? With our interactive document shredders advisor you can find the right product in just a few...

Read More

How large should the shredder be (collection volume)?

The right waste collection volume for your document shredder depends on two factors. First, establish how many people will be using the document shredder. The more people use the device, the bigger the waste collection volume should be. As a rule...

Read More

What is the operating time of my shredder?

Every document shredder has an individual run time. Depending on the device’s cutting capacity, a document shredder can operate for a certain amount of time before it needs to be paused for a while. So run time refers to the amount of time for...

Read More

Do document shredders need to be serviced?

Ensuring that your document shredder has a long, trouble-free service life requires occasional maintenance. In addition to emptying the waste container, for some devices this includes oiling the cutting rollers. Oiling maintains your shredder’s...

Read More

What is strip cut?

Document shredders with strip cut shred a sheet of paper into multiple strips. The width of these strips depends on the security level. Strip cut does not always reliably prevent reproduction of the destroyed data, so this type of document...

Read More

What is crosscut?

Cross cut (also known as particle cut) means a sheet of paper is chopped into small particles. The sheet is cut both vertically and horizontally, so that only small particles are left over. The size of these particles depends on the security...

Read More

What is Particle cut?

Particle cut (also known as cross cut) means a sheet of paper is shredded into small particles. The sheet is sliced both vertically and horizontally, so small particles are all that remain after shredding. The size of these particles depends on...

Read More

What types of cuts are there in document shredders?

DAHLE document shredders come in three different cut types: strip cut, cross or particle cut, and micro cut. Cut types describe the kind of particles that are created when shredding a sheet of paper. Strip cut means the sheet is sliced into...

Read More

Compare with similar products

compare this product with similar products from this category

Current Product: DAHLE ShredMATIC® 150
Sku35150-16165
ExcerptUniversal document shredder with automatic paper feeder and particle cut P-4
DimensionsSelect a variation
Autofeed run time90min
BrandDahle
Cardsyes
CDs/DVDs-
Cut typeParticle cut
Entry width in mm220
FeaturesOil-free operation
Material to be cutCards, Paper
Noise level when idle (db(A))60 dB(A)
Paper clipsyes
Paper feederautomatic
Particle size (in mm)4 x 12 mm
Power consumption180 W
Power supply230 V
Run time90min
Security levelP-4
Security levelsP-4/F-1/T-4/E-3
Sheet capacity (80g/sqm)*1 - 150 sheets
Speed (m/min)1.8
Waste collection volume (in l)25 l
DAHLE PaperSAFE® 420
Sku23420-16174
ExcerptHigh-security document shredder for use at your desk with particle cut P-5
DimensionsSelect a variation
Autofeed run time-
BrandDahle
Cardsyes
CDs/DVDsyes
Cut typeMicro cut, Particle cut
Entry width in mm224
FeaturesEnergy saving mode
Material to be cutCards, CDs/DVDs, Paper
Noise level when idle (db(A))60 dB(A)
Paper clipsyes
Paper feedermanual
Particle size (in mm)2 x 15 mm
Power consumption350 W
Power supply230 V
Run time480min
Security levelP-5
Security levelsP-5/F-2/T-5/E-4
Sheet capacity (80g/sqm)*1 - 10 sheets
Speed (m/min)2.5
Waste collection volume (in l)25 l
DAHLE Deskside 404P
Sku52214-16989
ExcerptHigh-performance document shredder with 40 l waste collection volume and security level P-4
DimensionsSelect a variation
Autofeed run time-
BrandDahle
Cardsyes
CDs/DVDsyes
Cut typeParticle cut
Entry width in mm240
FeaturesEnergy saving mode, Oil-free operation
Material to be cutCards, CDs/DVDs, Paper
Noise level when idle (db(A))60 dB(A)
Paper clipsyes
Paper feedermanual
Particle size (in mm)4 mm 35 mm
Power consumption720 W
Power supply230 V
Run time65min
Security levelP-4
Security levelsP-4/F-1/O-3/T-4/E-3
Sheet capacity (80g/sqm)*19 - 21 sheets
Speed (m/min)2.1
Waste collection volume (in l)40 l
DAHLE Deskside 504P
Sku52222-17004
ExcerptHigh-performance document shredder with 40 l waste collection volume and security level P-5
DimensionsSelect a variation
Autofeed run time-
BrandDahle
Cardsyes
CDs/DVDs-
Cut typeMicro cut
Entry width in mm240
FeaturesEnergy saving mode
Material to be cutPaper
Noise level when idle (db(A))60 dB(A)
Paper clipsyes
Paper feedermanual
Particle size (in mm)2 mm 15 mm
Power consumption720 W
Power supply230 V
Run time40min
Security levelP-5
Security levelsP-5/F-2/T-5/E-4
Sheet capacity (80g/sqm)*13 - 15 sheets
Speed (m/min)2.1
Waste collection volume (in l)40 l
DAHLE PaperSAFE® 60
Sku23060-16167
ExcerptSmall document shredder for office and home use with strip cut P-2
DimensionsSelect a variation
Autofeed run time-
BrandDahle
Cardsyes
CDs/DVDs-
Cut typeStrip cut
Entry width in mm220
FeaturesOil-free operation
Material to be cutCards, Paper
Noise level when idle (db(A))70 dB(A)
Paper clips-
Paper feedermanual
Particle size (in mm)6 x mm
Power consumption130 W
Power supply230 V
Run time5min
Security levelP-2
Security levelsP-2/T-2/E-2
Sheet capacity (80g/sqm)*1 - 6 sheets
Speed (m/min)6
Waste collection volume (in l)11 l

You may also like…

0,00 
Professional document shredder with automatic paper feeder and P-5 particle cut
  • Shreds up to 300 sheets in a single load
  • 40 l waste collection volume
Compare Products