DIY-Tischkicker: The own championship in the garden

In 2017, there is neither a World Cup nor a European Championship? We have a good idea how you can bridge the thirsty stretch! Just build yourself a table kicker and organize your own championship in the garden. A table kicker is quickly ready and then it means: Off to the outside, teams and Toooor!

Here is the step-by-step guide for your table skaters. You need ...

• 1 wooden board, approx. 40 x 80 cm

• 2 thin, narrow wooden plates of 15 cm

• 4 roundwoods of 7 cm

• Green felt, 50 x 90 cm

• White color

• 1 piece of wire mesh fence

• Glue

• 1 handpacker, Such as the J-17 dual power with Novel A53 enameled brackets

• Bottle cork or plastic ball

Let's go: Five steps to a self-made table kicker

Step 1

Cut the green felt and place it on the wooden board. Then folds the fabric around the edges and attaches it with a handkerchief on the back.

Step 2

Next, you paint the playing field. The best way to do this is a piece of white chalk.

Step 3

Then the cut roundwoods are attached to the felt with a hot glue gun. For it to be really authentic, you can paint the wood in advance white.

Step 4

Fix the thin wooden boards with the handkerchief on the corners of the roundwoods, so that there is a gate on both sides of the playing field.

Step 5

The net is attached to the back of the gates. For this purpose you cut the gate nets from one piece of wire mesh fence to match the Torbalken. Then attach the net along the groins with the handkerchief.

The plastic ball or crown cap is tipped from gate to gate when playing with the finger. Have fun!

  • Handtacker J-17 dual worker

    Der große Handtacker mit hochwertigem ABS-Kunststoffgehäuse für den universellen Einsatz.

    Der Tacker kann durch den Schiebemechanismus vorne am Gerät einfach auf die Verarbeitung von Fein- bzw. Flachdrahtklammer eingestellt werden. Weiterhin ist er ausgestattet mit Unterlademechanik mit Sicherheitsentriegelung, Schlagkrafteinstellung, Griffverriegelung und Klammersichtfenster.

  • Feindrahtklammern A Typ 53 53/10 V2A Edelstahl á 1000

    Die Standard Feindrahtklammer für Hand-, Elektro-, Akku- und Drucklufttacker zur Befestigung von Stoffen und Gewebe.